Laser marking is professional

Laser marking is very flexible and professional way of permanent marking of almost any material. Marking trace is processed directly on a material and is ineffaceable until the marked part is somehow physically damaged on the place of marking.

If you decide for laser marking, your product becomes higher quality, it refers to your interest even in „small“ detail like marking of your products.  You distinguish from competitors and also keep the law and rules. You represent your brand entirely.

First, there will be trial marking

Before we recommend suitable laser system, we are ready to provide you few marked samples. You can send us several pieces of your parts to be used for sampling. Then you can judge the results and samples will allow you to make a decision.

It is really necessary to provide more than 2 pieces in order to achieve final results. You will obtain samples that look just like what you need.

Technical parameters

Beam source



@ 1.064 nm, @ 532 nm
(in green spectrum)


10 Hz up to 100 kHz

Output power

10W, 20W, 30W, 40W

Input power

< 300W

Dimensions of laser head


Weight of laser

< 11 kg




< 1.5 kW

IP Certification of cover


Marking field

60x60mm, 110x110mm, 155x155mm, 320x320mm

Laser beam diameter

cca 60 µm (standard lens)

Pulse width

6 - 80 ns


120.000 hours